Knowledge Base
Instructions, applications notes and technical articles
Find useful information about the tools we offer as well as technical background knowledge and numerous instructions in our Knowledge Base. You can use the filter function to narrow down our numerous items by category, manufacturer and other factors.
We also offer numerous articles for specific applications, click on the following link to go directly to the application areas.
SPC (ST Micro) Microcontroller Programmer & BDM Debugger
Based on a Power PC architecture, SPC5 microcontrollers offer up to 3 cores with up to 200 MHz.
Automated programming with Cyclone Control Console
The Cyclone Control Console is a powerful command-line application that allows simultaneous control of one or more Cyclones.
Repair of freezed bricked Intel Galileo board with Dediprog SF100
If your Intel® Galileo board is no longer heard, you should receive the Windows * com driver.
Send large data with Aardvark I2C / SPI host adapter
For the Aardvark host adapter, the buffer size is 64 bytes. However, the transactions can be much larger.
Differences between SPI EEPROMs & SPI Flash memory
In embedded systems, a storage device is a physical device that can store data that can be used to communicate or perform a specific function.
68HC08 Freescale Microcontroller Programmer & Debugger
The 68HC08 is an 8-bit microcontroller (MCU) from Freescale Semiconductor.
Unable to program TPS65982-EVM using the Aardvark.dll
In most cases this error is caused by using the wrong aardvark.dll version or install path.
PEmicro GDB Server | Debugging ARM Cortex-M Microcontroller
The PEmicro GDB server now supports the sequence control and FLASH programming of many ARM devices using GNU GDB debugger tools in addition to the PEmicro hardware interfaces.
68HCS08 Microcontroller Programmer
BDM firmware is implemented on the CPU-68HCS08 silicon, providing a comprehensive set of debug functionalities.
I2C EEPROM Programming using Aardvark Adapter Batch Mode
This article focuses on how to get the information into an EEPROM datasheet and how to run the commands in the control panel's batch mode.
How to Program SPI NOR Flash and EEPROM on StarProg-A
This application note illustrates how to program EEPROM and SPI NOR Flash with Dual die on StarProg-ATE.
ARM Cortex-M Microcontroller Debug & Programming Tools
The tools provided here by eVision Systems help you to reduce the complexity of application & product tests.
S12Z microcontroller programming tools
The S12ZVH microcontrollers belong to the S12 MagniV® 16-bit mixed-signal MCU family and are part of an automotive instrument cluster solution.
S32K3xx Secure Debug Support
NXP has released a new, scalable S32K3xx device family that features an advanced secure debug mechanism.
DSC Freescale Mikrocontroller Debugger
Digital signal controllers (DSC) combine the best features of microcontrollers (MCU) and powerful digital signal processing (DSP) capabilities in a single chip.
Gang programming with Cyclone programmers
A volume production solution is often based on simultaneous group programming of different target boards to meet the speed and throughput requirements.
Initial Key Creation and Installation on a Cyclone Programmer
This article describes how to create an Inital Key and how to install it on a Cyclone Programmer.
Power MPC5xx/8xx Freescale Microcontroller Programmer
The MPC5xx processors like the mPC555 and MPC565 are embedded 32-bit PowerPC microprocessors.
Coldfire V2, V3, V4 Microcontroller Programmiertools
ColdFire 32-bit embedded controllers combine high performance and advanced functionality with flexibility
RS08 Freescale Microcontroller Programmer
RS08 is a family of 8-bit microcontrollers from NXP Semiconductors.
Microcontrollers in mobile devices
Microcontrollers are small computers that we come across everywhere in our everyday lives, the smartphone is just one example of many.
MAC7xxx Freescale Microcontroller Programmer & Debugger
The MAC7xxx MCUs family is a pin-compatible family of 32-bit flash memory-based devices.
Programming of QSPI Flash with the Promira Serial Platform
In this article, the Promira platform erases, programs and reads the N25Q032A.
HCS12 Microcontroller Programmer
The HCS12 controllers are manufactured using an advanced 0.25µm process.