€595.00*
- 1 year guarantee
- 2.5% advance payment discount
- If you use the payment method in advance by bank transfer, 2.5% of the purchase amount will be automatically deducted at the checkout.
In Stock, Delivery time: 1 - 3 days
.jpg){kind=icon}
.jpg){kind=icon}
.jpg)
.jpg)
.jpg)
.jpg)
Description
The RCP600-XS Rogowski coil current probe of the RCP series measures AC currents and high frequency, large current signals up to 600 Apk, with a bandwidth of 10 Hz to 30 MHz with typical accuracy down to 1 % and less than 12mv noise.
The RCP is characterised by outstanding performance and exquisite design. A thin, flexible Rogowski coil with clip allows the user to make measurements without damaging the conductor or disturbing the device under test. For example, the flexible loop can be easily wrapped around a cable, allowing measurements to be taken in hard-to-reach places. Wire length and coil size can be customised, offering different choices for your daily design and troubleshooting.
Main features
- BNC connection: Can be used with any oscilloscope regardless of manufacturer
- Bandwidth: 10 Hz - 30 MHz
- Coil cross-section (diameter): 1.6 mm
- Accuracy (typical): 1 %
- Current range: 200 mApk - 600 Apk
Further functions
Measure the ID current of the MOSFET
The RCP series probes have excellent high-frequency measurement capabilities, easily handle high-speed signals and rapidly changing current waveforms, and help observe high-frequency harmonic components when measuring the ID current of MOSFETs.
BNC interface
The RCP600 current probe has a standard BNC interface, making it compatible with any oscilloscope from any manufacturer.
Small coil cross-section
The cross-sectional diameter of the coil is only 1.6 mm, allowing engineers to measure the current on the hard-to-reach parts of the circuit, for example on chips with narrow pin spacing such as TO-220, TO-47.
Applications
- Measurement of current with a mains frequency of 50/60 Hz
- Measurement of harmonic components in the current
- Measurement of pin currents in MOSFET or IGBT devices
- Measurement of load currents and higher-order harmonic currents in power electronics
Technical Data
| Model |  RCP300-XS | RCP600-XS |
|---|---|---|
| Bandwidth | 10Hz - 30MHz | 10Hz - 30MHz |
| Measuring range | 200mApk - 300Apk | 200mApk - 600Apk |
| Output sensitivity | 20 mV/A (50X) | 10 mV/A (100X) |
| Accuracy (typical) | 1 % | 1 % |
| Noise | <18 mVpp | <12 mVpp |
| Peak voltage of the coil insulation | AC 2 kVrms (1 min) (50 Hz/60 Hz) (Rogowski coil section only) | AC 2 kVrms (1 min) (50 Hz/60 Hz) (Rogowski coil section only) |
| Coil cross-section diameter | 1.6 mm | 1.6 mm |
| Interface | 1MΩ BNC | 1MΩ BNC |