Universal IC Programmer

Filter
–

Product Nr.: NuProg-E2
Der NuProg-E2 unterstützt UFS, eMMC, MCU, CPLD, FPGA, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND und EEPROM
...show more
Hardware Features
- Built-in high speed processor for high programming speed.
- Supports UFS/UMCP and eMMC/eMCP programming.
- UFS part (v2.0/v2.1/v3.0/v3.1)
- Supports setting of descriptors, attributes and flags
- LUN configuration and preset support
- eMMC part
- Supports User Area, Boot1/2 partition and Extend CSD
- Supports RPMB, GPP1~4, and Enhanced mode
- Supports USB 2.0 and USB 3.0 (with power adapter)
- Supports various storage ICs
- UFS, eMMC, MCU, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND, EEPROM, CPLD, FPGA
- Supports all IC packages
- CSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP, etc.
- Supports various file formats:
- Binary (bin/rom), Intel Hex (h16/h20/hex), Motorola S19(mhx/mot/s19/srec) and specific to MCU IC.
- Regular software update
- Programming project and socket are compatible with NuProgPlus.
- Socket adapters for NuProg-E2 and NuProg-E are not compatible.
- Windows 7/8/8.1/10 support
€995.00*

Product Nr.: NuProgPlus-U16
USB 3.1 powerful universal programmer, support EEPROM, Flash, MCU, eMMC, UFS, PCI-E SSD and CANbus devices.
...show more
Features
- The completely newly developed FPGA kernel architecture offers extremely high programming speed
- Supports both copy mode and program mode
- Flexible to support various programmable ICs/devices on the market
- Supports various memory ICs: UFS, eMMC, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND, and EEPROM
- MCU, CPLD and FPGA support
- Supports PCI-E SSD and CAN bus devices
- Supports various IC packages: CSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP, etc.
- Supports various file formats: Binary (bin/rom), Intel Hex (h16/h20/hex), Motorola S19 (mhx/mot/s19/srec) and the specific file format of MCU IC
- Supports up to 8 programming sockets (only 4 sockets for PCI-E, but can be expanded to 16 sockets for SPI Flash/UFS/eMMC)
- Duplicate for UFS/eMMC/PCI-E (Master IC/device is required as data source)
- Duplicate UFS data, LUN configuration and descriptors/attributes/flags. (RPMB duplication is not supported)
- Duplication of eMMC boot area, GPP, user area and ExtCSD. (RPMB duplication is not supported)
- Duplicate PCI-E SSD in different modes (whole disk, selected partition with specific percentage)
- Supports NAND Flash Skip Bad Block Management and partition file (CSV/DEF/MBN)
- Project file support for production programming
- Built-in high-speed storage to save project files or project folders for more stable and faster transfer
- Project download speed up to 100MB/s
- Press the start button to start programming after loading the project file to avoid the operator loading the wrong image file or selecting the wrong IC part number
- Three different launch modes to increase productivity
- Manual mode
- Automatic detection mode
- Handler mode
- The PC can connect to multiple NuProgPlus-U16 and program ICs at the same time
- With the stand-alone function, the user can program without a computer and only need to operate the LCD keyboard
€8,100.00*

Product Nr.: ProgMaster-U8
ProgMaster-U8 is a universal gang programmer, allows you to program 8 IC at a time and able to program various IC kinds!
...show more
Features
- Built-in high-speed processor for fast programming speed.
- Comprehensive IC support and packages of all kinds
- EEPROM, MCU, SPI NOR/NAND Flash, Parallel NOR/NAND Flash, eMMC/eMCP, CPLD, FPGA...etc.
- DIP, SOP, SSOP, TSOP, PLCC, QFN, BGA...etc.
- Software supports NAND FLASH Skip Bad Block and partition programming.
- Built-in memory card slot for project programming
- Save project files to SD card for more stable and faster transfer.
- One computer can be connected to several ProgMaster-U8 at the same time.
- With the stand-alone function, you can program without a computer and only need to select and start the project programming via the LCD keyboard.
- Exclusive design to increase productivity
- You can start programming as soon as the project file is loaded; it also avoids human error when importing the project file or IC models.
- Three advanced working modes:
- A. Manual mode: Press the "Start button" to run the programming after inserting the ICs into all sockets.
- B. Auto-detection mode: each socket works independently. Programming is performed immediately after inserting the IC into the socket.
- C. Handler mode: Used in DediProg auto handler system.
€4,500.00*

Product Nr.: StarProg-A
Dediprog's StarProg-A supports MCU, CPLD, SPI NOR Flash, SPI NAND Flash and EEPROM On Board Programming (ICP/ISP).
...show more
Hardware Features
- Optimized for integration into automated machines
- Support 1.2V ultra low voltage IC and 1.8V low voltage IC
- Supports multiple types of ISP protocols
- SWD, JTAG, SPI, I2C, BDM, UART and SWIM...
- Support for various IC families MCU, CPLD, SPI NOR Flash, SPI NAND Flash and EEPROM.
- Supports a variety of file formats such as Binary, Intel Hex, Motorola and ROM
- Supports stand alone mode
- Can program in standalone mode without being connected to a computer.
- Has a command line control option
- Provides Labview drivers and DLL API (supports serialization and key programming) for redevelopment and integration.
Applications
- Update of the serial flash soldered on board with or without power supply in standalone or PC GUI mode
- Prototypes or small series production, in-system or socket programming
- Control application, controller reset and MOSFET isolation status
- Integration into machines for automated programming
Product is discontinued

Product Nr.: StarProg-U
The Dediprog StarProg-U supports a variety of IC on the market, like EEPROM, SPI NOR/NAND FLASH, Parallel Flash, eMMC, MCU, etc.
...show more
Hardware Features
- Built-in high speed processor, for high programming speed.
- Supports EEPROM, SPI NOR/NAND Flash, Parallel NOR/NAND Flash, microcontroller (MCU), eMMC/eMCP, CPLD, FPGA, etc.
- Supports DIP, SOP, SSOP, TSOP, PLCC, QFN, LQFP, BGA package, etc.
- Regular device firmware update.
- Supports a variety of file formats such as binary, Intel Hex, Motorola, ROM, etc.
- Supports 1.8V low voltage ICs.
- Supports the use of third-party software to control the programmer via Windows command line.
- Powered by USB port, external power supply is not required.
- Unlimited number of StarProg-U programmers can be operated from one PC.
Produkt abgekündigt