Cable & Clips
10 Pin Split Grabber Clips Cable
10-pin gripper clip split cables with the individual strands make it easy to connect the I2C/SPI devices.
10-Pin Split Cable
The 10 pin split cable allows the individual connection of the SPI or I2C pins.
33 cm USB A-B Kabel
The USB A-B, 31cm cable connects the USB device to the Beagle 12 protocol analyzer quickly and easily. These cables are designed for high-speed data transmission.
34-Pin Grabber Clips Split Cable
The 34-pin grabber cable package includes a 34-pin split cable and 10 grabber clips.
34-Pin Split Cable
This cable attaches to the ribbon cable end directly on the Promira Serial Platform and allows you to connect any of the 34 Promira platform pins to your target.
34-Pin: 10-Pin Header Cable
The 34-pin connector has a "locking friction ramp" while at the other end is a 10-pin, 5x2, 0.010 connector.
34-Pin: 34-Pin Header Cable 100mm
One 34-pin end has an additional latch to ensure a good connection to the Promira platform, while the other 34-pin end is designed to easily connect to the boards.
CAN Split Cable
The split CAN cable with a 2 DB9 male connector on one end and a 1 DB9 female connector on the other end is used to connect a CAN network.
The CAN terminator is a DB9 male connector that terminates the CAN lines with a 120 ohm resistor.
DVI DDC Breakout Cable
The DVI DDC Breakout Cable is a standard 2 meter DVI-D single link cable with an additional 5x2 0.100" pitch keyed box connector.
The test clips are very useful for working with boards that don't have a standard 10-pin or 34-pin header.
OTG Mini Plug Cable Set
The USB OTG Mini-Plug Cable Assembly consists of two convenient cables that USB OTG developers can use
Promira Ethernet Kit
This power kit includes a 1.5 meter Cat 5 Ethernet cable and the USB Micro B universal power adapter.
SMA M/M Kabel
SMA cable for digital input or output on the Beagle USB 5000 SuperSpeed Protocol Analyzer
Total Phase I/O cable with test clips
The digital I/O cable features clamp-on test probes to connect the digital I/O interface to external logic.
USB extension cable
The USB extension cable provides a fast and interference-free connection.
USB Micro B Power Adapter
With this mains adapter you can operate your Promira ™ Serial Platform directly from any socket.
VGA DDC Breakout Cable
The VGA DDC Breakout Cable is a 2 meter VGA cable (HD15-male to HD15-male) with an additional 5x2 0.100" pitch keyed box connector.