CSS Electronics adapters, cables and accessories

The DB9-J1939 adapter cable is suitable for use in most heavy-duty vehicles.

The contactless CAN reader CANCrocodile analyses the CAN raw data via non-invasive electromagnetic fields.

The CAT to DB9 German 9-pin adapter fits most Caterpillar heavy-duty vehicles.

The contactless CAN reader analyses the raw CAN data via non-invasive electromagnetic fields.

The DB25 Flying Leads cable enables the connection of a wide variety of analogue, digital or pulse-type sensors.

This cable is ideal for connecting 4 CAN buses to the CANmod.router.

Example installations

The cable is typically used in two installation scenarios:

• Standalone: If your CANmod.input is connected directly to a vehicle/machine CAN bus, it is normally supplied with power via 7-28 V DC. In this case, the adapter cable can use the power supply of the CANmod.input directly to supply the sensors
• Additionally: If your CANmod.input is supplied with power via a CANedge 2nd port 5V power supply unit (on pin 1), this cannot be used directly as a supply for the DB25-DB25/DB9 adapter. Instead, you can redirect the power supply fed to the CANedge (7-32 V DC).

In both scenarios, you can use our DB9-DB9/DB9 adapter to split the power supply from the CANedge/CANmod and redirect it to your input sensors via the DB25-DB25/DB9 adapter. Go to Product

In this cost-effective package you receive 2x DB9 sockets/plug changers - 1 x male to male (M/M) plus 1 x female to female (F/F).

You can easily expand your CAN bus system with this 3 metre long DB9 plug to DB9 plug cable.

With the DB9 to DB9/DC power distributor, you can supply your CAN logger with power via a socket, a battery or a cigarette lighter socket, for example.

This DB9-Y splitter cable (D-Sub 9) allows you to split a single CAN bus DB9 connector into two connections.

With this DC plug and the DB9 to DB9/DC adapter, you can supply your CANedge/CLX000 CAN logger with power via the cigarette lighter, for example.

This adapter cable fits the Volvo Penta DT06 Deutsch connector, which can be found in many marine engines.

This cable serves as a starting point for customised cables for non-standard connections.

The In-Cab-to-DB9 (LBS) adapter fits most tractors and enables the connection of a CANedge/CLX000 logger

The micro SD card is supplied with an SD card adapter for easy insertion into your PC.

The micro SD card is supplied with an SD card adapter for easy insertion into your PC.

This adapter cable fits the 9-pin J1939 connector used in most lorries, buses and tractors.

This adapter cable fits the 9-pin J1939 connector used in most lorries, buses and tractors.

This 1.5 metre long DB9 to M12 adapter (5-pin) fits most marine vessels and CANopen devices.

The OBD2-DB9 adapter cable fits onto the connector near the steering wheel of your car.

The adapter cable fits onto the OBD2 connection near the steering wheel of a lorry.

The optional super SIM card offers instant connectivity.

This CAN bus terminating resistor is a 9-pin D-Sub plug and socket.