Bus Host Adapter

Filter
–

Product Nr.: TP240141
TP240141 - The Aardvark I2C/SPI Host Adapter is a fast and powerful I2C bus and SPI bus host adapter through USB.
...show more
I2C Features
- Performance of up to 800 kbps over USB with higher bandwidth compared to slower RS-232.
- Supports standard mode (100 kbps) and fast mode (400 kbps) and varying speeds from 1 kHz to 800 kHz.
- Supports inter-bit and inter-byte clock stretching, multi-master configurations, master send and receive, and asynchronous slave send and receive.
- Software configurable I2C pull-up resistors.
- Software-configurable target power pins to power downstream devices.
- Repeated start, 10-bit slave addressing, and combined format transactions.
- Display Data Channel (DDC)
- System Management Bus (SMBus)
- Power Management Bus (PMBus)
- Smart Battery Bus (SBBus)
- Intelligent Platform Management Interface (IPMI)
- Two Wire Interface (TWI)
† Actual system bus speed may vary based on capacity.
SPI Features
- Works in master or slave mode.
- Master signaling rate of up to 8 Mbit/s.
- Slave signaling rate of up to 4 Mbit/s.
- Send/receive full-duplex master.
- Asynchronous slave send / receive.
- Software-configurable target power pins to power downstream devices.
- Software-configurable slave select (SS) polarity in master mode.
€350.00*

Product Nr.: TP280121
The Cheetah SPI Host Adapter is a high-speed SPI adapter that is capable of communicating over SPI at up to 40+ MHz.
...show more
SPI Features
- Works in master or slave mode.
- Master signaling rate of up to 8 Mbit / s.
- Slave signaling rate of up to 4 Mbit/s.
- Send/receive full-duplex master.
- Asynchronous slave send / receive.
- Software-configurable target power pins to power downstream devices.
- Software-configurable slave select (SS) polarity in master mode.
€419.00*

Product Nr.: TP360110
The Komodo CAN Duo is a powerful USB-to-CAN adapter and analyzer that enables active CAN data transmission as well CAN bus monitoring
...show more
Main properties
- Dual channel: two independent adaptable CAN channels
- Transfer rate up to 1 Mbit/s
- Independent galvanic isolation per CAN channel
- 8 configurable GPIOs
- USB 2.0 full speed; bus powered
- Free software and API
- Cross-platform support: Compatible with Windows, Linux and Mac OS X
€599.00*

Product Nr.: TP360510
The Total Phase Komodo CAN Solo Interface is a CAN host adapter and protocol analyzer.
...show more
Main properties
- Dual channel: two independent adaptable CAN channels
- Transfer rate up to 1 Mbit/s
- Independent galvanic isolation per CAN channel
- 8 configurable GPIOs
- USB 2.0 full speed; bus powered
- Free software and API
- Cross-platform support: Compatible with Windows, Linux and Mac OS X
Product is discontinued

Product Nr.: TP500110
Promira is a universal hardware platform usable for a variety of applications, like I2C, SPI and eSPI.
...show more
I2C Features
- Performance of up to 800 kbps over USB with higher bandwidth compared to slower RS-232.
- Supports standard mode (100 kbps) and fast mode (400 kbps) and varying speeds from 1 kHz to 800 kHz.
- Supports inter-bit and inter-byte clock stretching, multi-master configurations, master send and receive, and asynchronous slave send and receive.
- Software configurable I2C pull-up resistors.
- Software-configurable target power pins to power downstream devices.
- Repeated start, 10-bit slave addressing, and combined format transactions.
SPI Features
- Works in master or slave mode.
- Master signaling rate of up to 8 Mbit/s.
- Slave signaling rate of up to 4 Mbit/s.
- Send/receive full-duplex master.
- Asynchronous slave send / receive.
- Software-configurable target power pins to power downstream devices.
- Software-configurable slave select (SS) polarity in master mode.
€900.00*