Hot Air Stations

Filter
–

Product Nr.: AT8502D
The ATTEN AT8502D 2 in 1 Rework Station includes a 550W hot air station and a 50W soldering station.
...show more
Heißluftsystem
- Intelligent cooling system is in place and can automatically delay the air supply when the unit is turned off, which greatly extends the life of the heater core and holder.
- Sprial heater core is used, which contributes to longer service life.
- The handpiece of the hot air gun has been redesigned to make the air more uniform. It is tremendously durable, which is ideal for maintenance, storage and transportation.
- The patented heating system ensures very fast heating up
Additionally available is an independent cold air function to cool components. - The built-in diaphragm pump ensures a constant pressure and is therefore suitable for various types of nozzles.
Lötsystem
- The soldering station uses a split heater core material that provides heat conduction and an extremely high temperature return speed. It takes only 10 seconds from room temperature to 350°C.
- The front sensor is used to ensure high accuracy of temperature control and good temperature stability.
- The soldering iron handle holder is lightweight and convenient, and includes a sensor that initiates sleep mode when innactivity is detected.
€199.00*

Product Nr.: AT852D
The ATTEN AT852D hot air soldering station is a unit with 550 watts of power, which means that the station quickly reaches operating temperature.
...show more
Features
- Patented heater for rapid heating
- Switchable between target and actual temperature.
- Intelligent cooling system and delayed shutdown function to extend the life of the handpiece.
- LCD screen for visualization of the control.
- Temperature adjustment protection, automatic time-controlled switch-off.
- MCU controlled temperature calibration, constant work compensation.
- High airflow with brushless fan.
- Convertible with Straight Air and Spiral Air.
- Auto sleep function.
Product is discontinued

Product Nr.: GT-1028
ATTEN GT-1028 is a 1000W high power hot air rework station equipped with a vacuum suction pin.
...show more
Features
- Intuitive menu navigation through large silicone buttons
- Display of parameter data as well as information in the form of a graphic display on a large screen
- 3 configurable temperatures and air flow setting are available at the touch of a button
- Can be controlled via an external pedal
- Very fast heat-up due to 1000 watt heating core: from room temperature to 350 °C only approx. 8 s
- High-contrast multifunctional LC display for status and programming display
- Temperature freely selectable between 100 °C and 500 °C
- Temperature stability: ± 1 °C (without load / MCU-controlled temperature calibration)
- Automatic, adjustable temperature setback to 100 °C during soldering breaks (1-120 min)
- ESD-safe design, low-voltage heating completely isolated from power supply
- LCD display that facilitates monitoring of parameters and system setting.
- Plug-in design facilitates change of handle and heater elements.
- Built-in RS-485 communication interface, supports IoT function.
- Built-in brushless fan (airflow can reach 120 l/min)
- Infrared temperature calibration function.
- Supports timing / manual heating mode
- Password protection function Make parameter setting with permission.
- Automatic standby/air delay after power off makes work safer.
€489.00*

Product Nr.: GT-8102
ATTEN GT-8102 is a 1000W high power intelligent hot air rework station equipped with vacuum suction pen.
...show more
Features
- Intuitive menu navigation with large silicone buttons
- Display of parameter data and information in the form of a graphic display on a large display
- 3 adjustable temperatures available at the push of a button
- Very fast heating: from room temperature to 350 °C in only approx. 8 s
- High-contrast multifunction LC display for status and programming display
- Checking the readiness for operation by means of a bar display
- Temperature freely selectable between 100 °C and 480 °C
- Exact temperature calibration possible, calibration range ± 50 °C
- Temperature stability: ± 1 °C (no load / MCU-controlled temperature calibration)
- Temperature can be set in 5 degree or 1 degree increments
- Automatic, adjustable temperature reduction to 100 °C (1–120 min) during soldering breaks
- ESD-safe design, low-voltage heater completely isolated from the power supply
- Intelligent detection of working or non-working status.
- LCD display that makes it easy to monitor parameters and set up the system.
- Plug-in design makes it easy to change the handle and heating elements.
- Vacuum suction cups, components can be vacuumed after desoldering.
- Built-in fan (air volume can reach 120L/min)
- The 1000W high-power heating core ensures rapid heating to reach the specified temperature
- PID algorithm controlled temperature accurately and stably.
- Support timing/manual heating mode
- Password protection function Make parameter setting with permission.
- 3 sets of shortcut air volume/temperature data make it more convenient.
- Functions of temperature compensation, fixed temperature, upper and lower temperature limits make temperature management easier.
- Auto standby/air delay after power off makes work safer.
Product is discontinued

Product Nr.: H312
Aixun H312 Smart Hot Air Rework Station with 1400 W heating power for higher wind speed and efficient soldering
...show more
Features
- 1400 W heating core for fast heating and maximum performance
- WiFi network OTA upgrade, connection via Bluetooth
- 3.5-inch IPS HD screen, integrated intelligent operating system
- One key switch to switch between the three desoldering modes, cold air mode and power work mode
- Dual combination of segment and curve desoldering
- Quiet brushless fan with strong but silent airflow, 1400 W power for extremely fast heat-up.
- Integrated desoldering parameters for all chip types and real-time cloud data update. Users can retrieve, edit and save data to create their own cloud database.
€240.00*

Product Nr.: H314
The Aixun H314 Smart Hot Air Station has 1400 watts of power and an integrated fingerprint sensor.
...show more
Features
- High-resolution 3.5-inch IPS display with integrated smart operating system
- Integrated fingerprint recognition for automatic switching between multiple user accounts - the world's first intelligent desoldering station with thermal imaging technology
- Wi-Fi and Bluetooth connectivity with OTA updates and support for AI-powered voice control
- Powerful 1400 W heating element, reaches 380 °C in just 3 seconds in high-speed mode
- Three operating modes (soft, standard, high-speed) and 9 channels; allows switching between 5 user accounts via fingerprint - memory capacity for up to 45 user profiles
- Flexible desoldering technology with selectable segment and curve control, storage of personal cloud data and support for app extensions
- Patented 3D air nozzle design combined with precise temperature control software and optimised air duct system
- Innovative spring lock of the air nozzle, prevents blocking when changing nozzles under high temperatures
€299.00*

Product Nr.: ST-862D
The ATTEN ST-862D hot air soldering station is a unit with 1000 watts of power, which allows the station to reach operating temperature very quickly.
...show more
Features
- Patented heater for rapid heating
- Switchable between target and actual temperature.
- Intelligent cooling system and delayed shutdown function to extend the life of the handpiece.
- LCD screen for visualization of the control.
- Temperature adjustment protection, automatic time-controlled switch-off.
- MCU controlled temperature calibration, constant work compensation.
- High airflow with brushless fan.
- Convertible with Straight Air and Spiral Air.
- Auto sleep function.
€149.00*

Product Nr.: ST-8800D
The ATTEN ST-8800D hot air soldering station is a unit with 800 watts of power, which allows the station to reach operating temperature very quickly.
...show more
Features
- Large LCD screen
- Touch sensor inside the handpiece
- brushless vortex fan for more even air flow
- automatic cooling function (standby) effectively protects against overheating of the heating element
- Cold air function to cool components
- Password protection and key lock function
- With timer function and temperature compensation function
€92.00*