UFS & eMMC Programmer

Hardware Features

• Built-in high speed processor for high programming speed.
• Supports UFS/UMCP and eMMC/eMCP programming.
• UFS part (v2.0/v2.1/v3.0/v3.1)
  • Supports setting of descriptors, attributes and flags 
  • LUN configuration and preset support
• eMMC part
  • Supports User Area, Boot1/2 partition and Extend CSD
  • Supports RPMB, GPP1~4, and Enhanced mode
• Supports USB 2.0 and USB 3.0 (with power adapter)
• Supports various storage ICs
  • UFS, eMMC, MCU, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND, EEPROM, CPLD, FPGA
• Supports all IC packages
  • CSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP, etc.
• Supports various file formats:
  • Binary (bin/rom), Intel Hex (h16/h20/hex), Motorola S19(mhx/mot/s19/srec) and specific to MCU IC.
• Regular software update
• Programming project and socket are compatible with NuProgPlus. 
• Socket adapters for NuProg-E2 and NuProg-E are not compatible.
• Windows 7/8/8.1/10 support

Features

• The completely newly developed FPGA kernel architecture offers extremely high programming speed 
• Supports both copy mode and program mode
• Flexible to support various programmable ICs/devices on the market
  
  • Supports various memory ICs: UFS, eMMC, SPI NOR, SPI NAND, Parallel NOR, Parallel NAND, and EEPROM
  • MCU, CPLD and FPGA support
  • Supports PCI-E SSD and CAN bus devices
  • Supports various IC packages: CSP, BGA, QFN, QFP, SOP, TSOP, SSOP, PLCC, DIP, etc.
  • Supports various file formats: Binary (bin/rom), Intel Hex (h16/h20/hex), Motorola S19 (mhx/mot/s19/srec) and the specific file format of MCU IC
• Supports up to 8 programming sockets (only 4 sockets for PCI-E, but can be expanded to 16 sockets for SPI Flash/UFS/eMMC)
• Duplicate for UFS/eMMC/PCI-E (Master IC/device is required as data source)
  
  • Duplicate UFS data, LUN configuration and descriptors/attributes/flags. (RPMB duplication is not supported)
  • Duplication of eMMC boot area, GPP, user area and ExtCSD.  (RPMB duplication is not supported)
  • Duplicate PCI-E SSD in different modes (whole disk, selected partition with specific percentage)

• Supports NAND Flash Skip Bad Block Management and partition file (CSV/DEF/MBN)
• Project file support for production programming
  
  • Built-in high-speed storage to save project files or project folders for more stable and faster transfer
  • Project download speed up to 100MB/s
  • Press the start button to start programming after loading the project file to avoid the operator loading the wrong image file or selecting the wrong IC part number
• Three different launch modes to increase productivity
• Manual mode
  
  • Automatic detection mode
  • Handler mode
  • The PC can connect to multiple NuProgPlus-U16 and program ICs at the same time
  • With the stand-alone function, the user can program without a computer and only need to operate the LCD keyboard