Protocol Analyzer

Filter
–

Product Nr.: TP320121
The versatile Beagle I2C/SPI Protocol Analyzer is the ideal tool for the embedded engineer who is developing an I2C, SPI, or MDIO based product.
...show more
Main properties
- Monitor I2C non-intrusively up to 4MHz
- Non-intrusive monitoring of SPI up to 24MHz †
- Non-intrusive monitoring of MDIO up to 2.5MHz (Clause 22 and Clause 45) ‡
- Real-time data acquisition and display - observe I2C and SPI packets as they occur on the bus.
- Bit-level timing with up to 20 ns resolution.
- Fully compatible with Windows, Linux and Mac OS X
- Includes full feature monitoring tools
€419.00*

Product Nr.: TP360110
The Komodo CAN Duo is a powerful USB-to-CAN adapter and analyzer that enables active CAN data transmission as well CAN bus monitoring
...show more
Main properties
- Dual channel: two independent adaptable CAN channels
- Transfer rate up to 1 Mbit/s
- Independent galvanic isolation per CAN channel
- 8 configurable GPIOs
- USB 2.0 full speed; bus powered
- Free software and API
- Cross-platform support: Compatible with Windows, Linux and Mac OS X
€599.00*

Product Nr.: TP360510
The Total Phase Komodo CAN Solo Interface is a CAN host adapter and protocol analyzer.
...show more
Main properties
- Dual channel: two independent adaptable CAN channels
- Transfer rate up to 1 Mbit/s
- Independent galvanic isolation per CAN channel
- 8 configurable GPIOs
- USB 2.0 full speed; bus powered
- Free software and API
- Cross-platform support: Compatible with Windows, Linux and Mac OS X
Product is discontinued

Product Nr.: TP320221
The Beagle USB 12 is a full/low-speed, distortion-free USB protocol analyzer.
...show more
Hardware requirement
- Intel or AMD 2 GHz processor or faster
- 1 gigabyte (GB) of physical RAM (32-bit) or 2 GB of RAM (64-bit)
- 2 GB or more available disk space
- High Speed USB Port
- VGA suitable for a screen resolution of 1024 x 768 or higher
- Internet access is helpful
Supported operating systems (32-bit and 64-bit)
- Windows: 7, 8, 8.1, 10
- Linux: Red Hat, SuSE, Ubuntu, Fedora, Arch, CentOS, Debian
- Mac OS X: 10.5-10.10
€550.00*

Product Nr.: TP320510
The Beagle USB 480 Protocol Analyzer is a non-intrusive high-speed USB 2.0 bus monitor.
...show more
Main properties
- Non-intrusive monitoring of high-speed USB 2.0 (up to 480 Mbit/s)
- Real-time USB class level decoding with Data Center Software
- Two recording modes: real time and delayed download
- High speed USB chip detection
- Robust automatic speed detection
- Hardware based packet suppression
- Digital inputs and outputs for synchronization with external logic
- Detect suspend/resume events and unexpected signals
- Free software and API available
- Fully compatible with Windows, Linux and Mac OS X
€1,295.00*

Product Nr.: TP323610
USB 480 Power plus extended triggers - The Beagle USB 480 Power Protocol Analyzer – Ultimate Edition enables VBUS current and voltage measurement.
...show more
Current/Voltage Monitor
- Graphing real-time VBUS current and voltage readings
- Interactive and bi-directional correlation of current/voltage values with USB data
High performance hardware buffer
- 256MB capacity
- Large ring buffer
Real-time USB class level decoding
- HID, Audio, Video, Still, Printer
- Storage, Hub
- Network, Mobile, CDC
€2,729.00*

Product Nr.: TP322610
USB bus monitor for real-time recording analysis of USB 3.0 & USB 2.0 data.
...show more
Key Features
- Monitor USB 3.0 and USB 2.0 simultaneously without intervention
- 4GB on-board buffer with live data streaming to analysis computer
- Real-time USB class level decoding with Data Center Software
- Precise timing up to a resolution of 2 ns
- Match/Action trigger and filter system
- Hardware-based USB 2.0 and 3.0 packet suppression
- USB 3.0 downlink enables longer recordings
- Enable advanced synchronization to monitor applications that require multiple analyzers
- Automatic support for data encryption, spread spectrum clocking, polarity reversal and receiver detection
- Multiple digital inputs and outputs for synchronization with external devices
- Fully compatible with Windows, Linux and Mac OS X with support for 32 and 64-bit systems
Hardware requirement
- Intel or AMD processor operating at 2 gigahertz (GHz) or faster
- 1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64-bit)
- 2 GB or more free disk space
- Full-speed USB interface
- Screen resolution of 1024x768 or better
- Internet connection is helpfuldus.
€5,999.00*

Product Nr.: TP350110
The USB Power Delivery Analyzer is a monitoring solution for the USB cable power supply.
...show more
Key Features
- Sniffing Power Delivery (PD) traffic on both control channel lines (CC1/CC2)
- Message decoding, including performance negotiation, alternate mode negotiation, VDM data display, etc.
- Capturing and displaying extended PD 3.0 messages
- Decode DisplayPort VDMs
- Transparent switching in a USB Type-C connection
Product is discontinued

Product Nr.: TP322510
The Beagle 5000 V2 USB 3.0 Standard Protocol Analyzer is an easy-to-use and versatile tool
...show more
Main features
- Simultaneous monitoring of USB 3.0 and USB 2.0 without intervention
- 4 GB on-board buffer with live data streaming to the analysis computer
- Real-time USB class-level decoding with Data Center software
- Precise timing down to 2 ns resolution
- Match/action trigger and filter system
- Hardware-based USB 2.0 and 3.0 packet suppression
- USB 3.0 downlink enables longer recordings
- Enable advanced synchronization to monitor applications that require multiple analyzers
- Automatic support for data encryption, spread spectrum clocking, polarity inversion, and receiver detection
- Multiple digital inputs and outputs for synchronization with external devices
- Fully compatible with Windows, Linux, and Mac OS X with support for 32- and 64-bit systems
Hardware requirement
- Intel or AMD processor operating at 2 gigahertz (GHz) or faster
- 1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64-bit)
- 2 GB or more of free hard disk space
- Full-speed USB interface
- Screen resolution of 1024x768 or better
- Internet connection is helpful.
Product is discontinued

Product Nr.: TP323510
The Beagle USB 480 Power Analyzer allows logging of USB data packets and simultaneous monitoring of the VBUS.
...show more
Current/voltage monitor
- Graphical display of VBUS current and voltage values in real time
Interactive and bidirectional correlation of current/voltage values with USB data
High-performance hardware buffer
- 256 MB capacity
- Large ring buffer
Real-time decoding at USB class level
- HID, audio, video, still image, printer
- Mass Storage, Hub
- Network, Mobile, CDC
Produkt abgekündigt

Product Nr.: TP323410
Upgrade of the Beagles 5000 USB 3.0 Standard v2 to USB 5000 v2 Ultimate Version.
...show more
Upgrading gives you the following options:
- Concurrent capture option
- SuperSpeed Downlink Upgrade
- USB 3.0 Advanced State-Based Matching Option
- Multi analyzer synchronization option
- 4GB storage option
€2,890.00*