
Remaining stock
Remaining stock, demo units & returns
Below you will find an overview of all remaining stock, demo units & returns.
Details of the units on offer
- Residual items are appliances (new goods) that we will no longer carry in our range in the future and that are discounted.
- Returned products are products that have already been returned by a customer within the 14-day right of withdrawal.
- Demo units are units that have already been put into operation by us for demonstrations and are no more than 1 year old. Unless otherwise stated, there are no signs of use.
Filter
–
41.4 %
Remaining stock

Product Nr.: CP1003
The CP1003 current measuring probe has a current measuring range of 6A / 30A and a bandwidth of 100 MHz.
...show more
Features
- Degaussing and automatic zero synchronization
- Supports manual and automatic zero calibration
- Powered directly from the Micsig UPI interface
- Automatic matching with Micsig UPI oscilloscopes
- Overload indicator with flashing light
Suitable for...
- Electronics in electric vehicles
- Design of switching power supplies
- Electronic engineering experiment
- Design of semiconductor devices
- Avionics Blueprint
- Design of inverters/transformers
- Design of electronic ballasts
- Industrial Control / Consumer Electronics Design
- Design of motor drives
- Power electronics and electric drive design
Product is discontinued
41.62 %
Remaining stock

Product Nr.: CP503
The current measuring probe CP503 has a current measuring range of 6A and 30A.
...show more
Features
- Degaussing and automatic zero synchronization
- Supports manual and automatic zero calibration
- Powered directly from the Micsig UPI interface
- Automatic matching with Micsig UPI oscilloscopes
- Overload indicator with flashing light
Suitable for...
- Electronics in electric vehicles
- Design of switching power supplies
- Electronic engineering experiment
- Design of semiconductor devices
- Avionics Blueprint
- Design of inverters/transformers
- Design of electronic ballasts
- Industrial Control / Consumer Electronics Design
- Design of motor drives
- Power electronics and electric drive design
Product is discontinued
29.24 %
Remaining stock

Product Nr.: EM100Pro-G2
The Dediprog EM100Pro-G2 SPI NOR Flash Emulator emulates ALL SPI NOR Flash in the market.
...show more
Hardware Features
- Emulation of all commercially available SPI NOR Flash with one click
- Supports up to 2Gbit SPI NOR Flash emulation
- Supports Single IO, Dual IO, and Quad IO
- Quad IO supports SPI CLK up to 50MHz (AC switching power supply is required)
- Automatic switching from 3.3V or 1.8V according to IC voltage specifications
- Built-in 512MB buffer, supporting storage of a larger number of SPI trace logs.
- Two-color LED status indicator
- Supports 4-byte address mode option
- Provides the option to use CS1 or CS2
- Additional debugging function: SPI bus trace and HyperTerminal
- Code update in less than 3 seconds
- Powered by USB and palm-sized
- Support for Windows 2003 and higher & support for 32-bit and 64-bit operating systems
Developer functions
- Minutes become seconds when updating SPI NOR flash code.
- Debug your application efficiently over the available SPI bus with our SPI trace, SPI trigger, SPI hyper terminal for debug messages
- Develop your own application debugger using our bidirectional SPI hyper terminal and control the application from your host PC
- EM100Pro-G2 can be connected to an Intel motherboard via a special adapter ISP-ADP-Intel-C (option).
Product is discontinued
53.46 %
Restposten

Product Nr.: K110
K110 is an engineering IC programmer that supports the majority Flash ICs on the market.
...show more
Features
- Built-in high speed processor for high programming speed.
- Support serial bus memory IC and package type.
- including SPI NOR Flash, SPI NAND Flash, EEPROM, SOP, WSON, USON and BGA.
- Support serial interface protocol including SPI, I²C and uWire.
- Supports a variety of file formats, including binary, Intel Hex, Motorola and ROM, etc.
- Provides a command line for software development.
- Supports stand-alone mode for IC programming without PC.
- ATE port with ISP adapter, provides Busy/Pass/Error and Start pins for remote control.
- Supports 1.2V low voltage IC
- Simultaneous support of multiple programmers for parallel IC programming.
€363.00* €780.00*
3.46 %
Restposten

Product Nr.: SDG1032X
The SDG1032X function generator has a bandwidth of 30 MHz, as well as 2 channels.
...show more
Features
- Dual channel, with a bandwidth of up to 30 MHz and an amplitude of up to 20 Vpp
- 150 MSa/s sampling rate, 14-bit vertical resolution and 16 kpts signal length
- Innovative EasyPulse technology, capable of generating pulse waveforms with lower jitter, provides a wide range and extremely high precision in setting pulse width and rise/fall times
- Innovative TrueArb technology supports user-defined waveforms from 2 to 16 kpts and user-defined sampling rates from 1 μSa/s to 30 MSa/s
- Dedicated circuitry for square wave function, can generate square waves up to 60 MHz with jitter less than 300 ps + 0.05 ppm period
- Many analog and digital modulation modes: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM
- Sweep and burst functions
- Harmonic generator function
- Waveform combining function
- High precision frequency counter
- Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
- Optional interface: GPIB
- 4.3" TFT LCD display
Product is discontinued
Restposten

Product Nr.: SDG1062X
The SDG1062X function generator has a bandwidth of 60 MHz, as well as 2 channels.
...show more
Features
- Dual channel, with a bandwidth of up to 60 MHz and an amplitude of up to 20 Vpp
- 150 MSa/s sampling rate, 14-bit vertical resolution and 16 kpts signal length
- Innovative EasyPulse technology, capable of generating pulse waveforms with lower jitter, provides a wide range and extremely high precision in setting pulse width and rise/fall times
- Innovative TrueArb technology supports user-defined waveforms from 2 to 16 kpts and user-defined sampling rates from 1 μSa/s to 30 MSa/s
- Dedicated circuitry for square wave function, can generate square waves up to 60 MHz with jitter less than 300 ps + 0.05 ppm period
- Many analog and digital modulation modes: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM
- Sweep and burst functions
- Harmonic generator function
- Waveform combining function
- High precision frequency counter
- Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
- Optional interface: GPIB
- 4.3" TFT LCD display
Product is discontinued
27.1 %
Remaining stock

Product Nr.: SF700
The SF700 is a high-speed ISP programmer for updating the on-board soldered SPI flash.
...show more
Hardware Features
- Built-in high speed processor for high programming speed.
- Supports SPI Octal NOR Flash, SPI NOR Flash, and SPI NAND Flash.
- Supports a variety of file formats such as Binary, Intel Hex, Motorola S19 and ROM, etc.
- Supports command line mode for new software development.
- Supports stand-alone mode for IC programming without PC.
- ATE port with ISP adapter, provides Busy/Pass/Error and Start pins for remote control.
- Supports 1.2V low voltage IC.
- Multiple programmers support parallel programming of IC.
Software Features
- PC based SF700 programming software with different modes:
- Engineering Mode features advanced developer and repair functions
- Production mode for simultaneous control of multiple SF700 programmers
- Command line to control the SF700 by user defined software
- Supports Windows 2003 (32 bit and 64 bit) and higher
Applications
- Updating of the serial flash soldered to the board with or without power supply in standalone or PC GUI mode
- Prototype or low volume production, in-system or socket programming
- Control application, controller reset and MOSFET isolation status
- Update of internal flash (Ezport MCF5223, MCF5221, MCF5213) or external SPI flash (SBF interface MCF5445, MCF5227) of Freescale MCU
Product is discontinued
33.52 %
Remaining stock

Product Nr.: STO1104C
The STO1104C is an tablet oscilloscope with classic control knobs and touch screen.
...show more
Features
- Compact oscilloscope with 4 channels
- Bandwidth 100 MHz
- 1 GS / s real-time sampling rate.
- Replaceable battery
- Up to 28 Mpts memory depth.
- Acquisition rate of up to 80,000 Wfms / s.
- 8 "/ 8" industrial LCD, 800x600 resolution, capacitive multi-point touchscreen.
- Android system, quick response to operation.
- Interfaces: Ethernet / LAN, WiFi, USB 2.0 host & device; HDMI.
- Connection for probe calibration.
- Bus trigger and decoding supported: UART, I²C, SPI, CAN, LIN.
- PC software, iOS and Android mobile app for remote control of the oscilloscope.
- Built-in 8G memory for waveform and video recording.
- Lithium battery, battery life up to 5 hours.
- Screen sharing via WiFi, USB and HDMI
Product is discontinued
38.66 %
Remaining stock

Product Nr.: STO1152C
The STO1152C is an tablet oscilloscope with classic control knobs and touch screen.
...show more
Features
- Compact oscilloscope with 2 channels
- Bandwidth 150 MHz
- 1 GS / s real-time sampling rate.
- Replaceable battery
- Up to 28 Mpts memory depth.
- Acquisition rate of up to 80,000 Wfms / s.
- 8 "/ 8" industrial LCD, 800x600 resolution, capacitive multi-point touchscreen.
- Android system, quick response to operation.
- Interfaces: Ethernet / LAN, WiFi, USB 2.0 host & device; HDMI.
- Connection for probe calibration.
- Bus trigger and decoding supported: UART, I²C, SPI, CAN, LIN.
- PC software, iOS and Android mobile app for remote control of the oscilloscope.
- Built-in 8G memory for waveform and video recording.
- Lithium battery, battery life up to 5 hours.
- Screen sharing via WiFi, USB and HDMI
Product is discontinued
40.85 %
Remaining stock

Product Nr.: STO1152E
The STO1152E is an tablet oscilloscope with classic control knobs and touch screen.
...show more
Features
- Compact oscilloscope with 2 channels
- Bandwidth 150 MHz
- 1 GS / s real-time sampling rate.
- Replaceable battery
- Up to 70 Mpts memory depth.
- Acquisition rate of up to 130,000 Wfms / s.
- 8 "/ 8" industrial LCD, 800x600 resolution, capacitive multi-point touchscreen.
- Android system, quick response to operation.
- Interfaces: Ethernet / LAN, WiFi, USB 2.0 host & device; HDMI.
- Connection for probe calibration.
- Bus trigger and decoding supported: UART, I²C, SPI, CAN, LIN.
- PC software, iOS and Android mobile app for remote control of the oscilloscope.
- Built-in 8G memory for waveform and video recording.
- Lithium battery, battery life up to 5 hours.
- Screen sharing via WiFi, USB and HDMI
Product is discontinued
23.82 %
Remaining stock

Product Nr.: TO1102
The TO1102 is an oscilloscope from the Miscig tBook series, an innovative oscilloscope series that is one of the first in the world to be operated purely via touch.
...show more
Features
- Compact oscilloscope with 2 channels
- Bandwidth 100 MHz
- 1 GS / s real-time sampling rate.
- Linux operating system
- Replaceable battery
- Up to 28 Mpts memory depth.
- 130,000 Wfms / s acquisition rate - 270,000 Wfms / s (Segmented Memory Mode).
- 8 "/ 8" industrial LCD, 800x600 resolution, capacitive multi-point touchscreen.
- Interfaces: Ethernet / LAN, WiFi, USB 2.0 host & device; HDMI.
- Connection for probe calibration.
- Bus trigger and decoding supported: UART, I²C, SPI, CAN, LIN.
- PC software, iOS and Android mobile app for remote control of the oscilloscope.
- Built-in 8G memory for waveform and video recording.
- Lithium battery, battery life up to 5 hours.
- Screen sharing via WiFi, USB and HDMI
Product is discontinued
30.63 %
Remaining stock

Product Nr.: TO1152
The TO1152 is an oscilloscope from the Miscig tBook series, an innovative oscilloscope series that is one of the first in the world to be operated purely via touch.
...show more
Features
- Compact oscilloscope with 2 channels
- Bandwidth 150 MHz
- 1 GS / s real-time sampling rate.
- Linux operating system
- Replaceable battery
- Up to 28 Mpts memory depth.
- 130,000 Wfms / s acquisition rate - 270,000 Wfms / s (Segmented Memory Mode).
- 8 "/ 8" industrial LCD, 800x600 resolution, capacitive multi-point touchscreen.
- Interfaces: Ethernet / LAN, WiFi, USB 2.0 host & device; HDMI.
- Connection for probe calibration.
- Bus trigger and decoding supported: UART, I²C, SPI, CAN, LIN.
- PC software, iOS and Android mobile app for remote control of the oscilloscope.
- Built-in 8G memory for waveform and video recording.
- Lithium battery, battery life up to 5 hours.
- Screen sharing via WiFi, USB and HDMI
Product is discontinued