S12Z Microcontroller Programming Tools

The S12ZVH MCU integrates a sophisticated MCU with a voltage regulator, CAN and LIN physical layer, display controller, and instrument gage drivers for entry-level automotive and industrial instrument clusters applications. The S12ZVH microcontrollers are part of the 16-bit S12 MagniV® mixed-signal MCU family and are part of an automotive instrument cluster solution demostrating high integration in a single chip. The S12ZVH MCU allows designing an instrument cluster with a smaller and more energy-efficient footprint, reducing cost and improving overall system reliability using a minimized component number. The tools provided by eVision Systems help you to reduce the complexity of application and product tests and to implement your application on your MCU without errors.

1. Compatible Debug Interfaces

The Multilink models greatly simplify programming and debugging of embedded target systems. They allow a PC to communicate with a target processor via a high-speed USB interface on the PC and a debug port on the microcontroller. The PC can then control the microprocessor through the target chip's debug port. Debug mode allows full control over processor operation, regardless of whether the processor has already been programmed. For example, a controlling application can access the memory from the CPU's point of view.

If you are new to on-chip debugging, you can access a short tutorial here.

The Multilink Series

Compatible multilink models for Qorivva S12Z

The USB Multilink Universal, which is compatible with S12Z as well as the NXP Freescale and other Devices. (see supported device families)

Common features of both models

Fast, trouble-free USB 2.0 communication interface
Draw your power directly from the USB port - no external power supply required
Multi-voltage support for targets from 1.6 to 5.25 volts
Contains all ribbon cables for all supported architectures
The Multilink FX Universal model, which, in addition to enhanced security and automation functions, enables debugging and programming at 4 to 10 times the speed. The FX Universal model supports the same wide range of MCU families as the Universal version plus devices from the MPC5xx/8xx and HC16/683xx series. (see supported device series)

S12Z Flash Programming Software

The addition of the flash programming software PROG-HL-S12Z enables the Multilink to program flash memories and EEPROMs on the chip. The Multilink series in combination with the S12Z programming software is suitable for both development and small series

Supported Development Tools

NXP/Freescale CodeWarrior 10.6, IAR Embedded Workbench, Keil -Vision

Integrated support for Multilink Universal & FX as well as Cyclone Universal for debugging and programming

Atollic True STUDIO, KDS Kinetis Design Studio, Kosmische IDE & ZAP

Use the free PEmicro GDB Server to support the Multilink Universal & FX and the Cyclone Universal for debugging and programming

In addition, interface routines are available, consisting of a set of C libraries that allow calling the APIs for the BDM interface.

2. Compatible In System programmers

PEmicro's CYCLONE Flash Programmers are powerful tools for in-circuit programming, debugging and testing of microcontrollers (MCU), either in standalone mode or controlled from a PC. The PE Micro programmers are reliable, easy to configure and extremely easy to use.

Key Features

Stand alone programming
Delimitation and encryption of the programming image
Cyclone powers the target system
Manual and automated programming
Support for serial number setting
Use as a debug probe during development

Operating Modes

Interactive programming packages are provided for all supported CPU families.
Link to a PC: Multiple target programs downloadable. The Cyclone can then be used as a manually controlled, standalone flash programmer for on-chip or off-chip memory.
Control via a PC (Ethernet, USB, serial interface): Automated commands, batch commands or a C program from the DLL included in the package allow the Cyclones to be controlled.