STM8 Microcontroller Programmer & Debugger

The 8-bit microcontroller platform from ST is based on a powerful 8-bit core and modern peripherals. This platform is manufactured using ST's proprietary embedded 130 nm non-volatile memory technology. The tools provided by eVision Systems help you to reduce the complexity of application and product tests and to implement your application on your MCU without errors.

Compatible Software & Hardware Interfaces

The Cyclone models simplify the programming and debugging of embedded target systems considerably. They enable a PC to communicate with a target processor via a high-speed USB interface on the PC and a debug port with the microcontroller. The PC can then control the microprocessor through the target chip's debug port. The debug mode enables complete control of the processor operation, regardless of whether the processor has already been programmed. For example, a controlling application can access the memory from the point of view of the CPU.

If you are new to on-chip debugging, you can access a short tutorial here.

STM8 Flash Algorithms

PE Micro bietet Flash-Algorithmen zum Programmieren von STM8 -MCUs. Für weitere Informationen klicken Sie hier.

STM8 Adapter

The STM8 adapter for Cyclone FX Universal enables the user to program supported STM8 chips with the Cyclone FX Universal programming device.

You can find the adapter here.

Compatible In System programmers

PEmicro's CYCLONE Flash Programmers are powerful tools for in-circuit programming, debugging and testing of microcontrollers (MCU), either in standalone mode or controlled from a PC. The PE Micro programmers are reliable, easy to configure and extremely easy to use.

Key Features

Stand alone programming
Delimitation and encryption of the programming image
Cyclone powers the target system
Manual and automated programming
Support for serial number setting
Use as a debug probe during development

Operating Modes

Interactive programming packages are provided for all supported CPU families.
Link to a PC: Multiple target programs downloadable. The Cyclone can then be used as a manually controlled, standalone flash programmer for on-chip or off-chip memory.
Control via a PC (Ethernet, USB, serial interface): Automated commands, batch commands or a C program from the DLL included in the package allow the Cyclones to be controlled.