Dediprog QSPI-SOP008207mil-001E Board

The SOP 207mil socket adapter is supported by the programmers of the SF, Progmaster and StarProg series and by the K110 programmer.

€99.00*

Content: 1

In Stock, Delivery time: 1 - 3 days

Further information
Request a quote
Paypal-icon
Mastercard-icon
visa-icon
klarna-icon
Sepa-lastschrift-icon
invoice-icon
Product number: QSPI-SOP008207mil-001E
Manufacturer: Dediprog

Description

The SOP 207mil Socket Adapter is supported by the SF, Progmaster and StarProg series programmers as well as the K110 programmer.

  • Optimized circuitry to improve programming performance of Quad IO, Dual IO and Single IO.
  • Supports SPI Flash programming.
  • Dediware version 3.16.28.13 and higher supports EEPROM programming.
  • This socket adapter cannot be used on the K110/StarProg-A programmers to program I2C EEPROM.

Application instructions

1.) Make sure that the triangle mark on the lower left PCB is aligned with the triangle mark on the DediProg devices.
For a more detailed insertion direction, please download the document below.
Caution. Incorrect installation of the socket adapter may cause damage to the device and the socket.


2.) Align the pin 1 mark on the socket with pin 1 of the IC. Press the top of the socket down to insert the IC.
Visually check the connection between the socket and the device. If the connection is correct, the device is ready for programming.

3.) The use of a pick-up tool is recommended for handling the socket. Do not touch the circuit board directly, as dirt and static can cause errors when programming the device.

4.) Please remove the adapter from the device after finishing work.

QSPI-SOP008207mil-001E-IC-Drawing

Technical Data

Model SpecificationDediprog-QSPI-SOP008207mil-001E-transparent
QSPI-SOP008207mil-001E
Package Type SOP
Number of Pin 8W
Type Opentop
PCB Dimension 64x34
IC Size (mm)
 Length (D1 5.28

Width (E1)

 5.23
 Height (A)2.16
 Pitch(e)1.27
W Pins (E)7.9