With the GT-5200P, electronic tweezers or a soldering iron of up to 150 W can be used in parallel with the desoldering gun.
€639.00*
Content: 1
Volume discounts on request!
- 2.5% advance payment discount
- If you use the payment method in advance by bank transfer, 2.5% of the purchase amount will be automatically deducted at the checkout.
In Stock, Delivery time: 1 - 3 days
Further information
.jpg){kind=icon}
.jpg){kind=icon}
.jpg)
.jpg)
.jpg)
.jpg)
Product number: GT-5200P
Manufacturer: Atten
Description
The GT-5200P station has both a channel for connecting the desoldering gun to the vacuum pump and a conventional soldering channel for connecting various soldering tools such as soldering irons or tweezers. Both channels can be used in parallel.
The Atten GT-5200P soldering station has a high-quality heating element with 200 watts of power with a built-in vacuum suction pump and is supplied with suitable PC software for control. The soldering station automatically lowers the temperature to 150°C when not in use. Three different desoldering temperatures can be easily programmed individually and can be called up directly by pressing the corresponding selection button.
The desoldering station is supplied with two separate soldering holders.
Features
- Built-in vacuum suction pump.
- The maximum output is 150 W.
- Can automatically recognise the connected soldering tools and upload the corresponding parameters.
- Built-in RS485 interface for computer control.
- Software for control via a PC
- compatible with various types of soldering tools
- Intuitive menu navigation
- Display of parameter data and information in the form of a graphic on a large display
- 3 adjustable temperatures available at the touch of a button
- Very fast heat-up: from room temperature to 350 °C in only approx. 7 s
- High-contrast multifunction LC display for status and programming display
- Readiness for operation checked by bar display
- flexible connection cable with plug-in system
- Temperature freely selectable between 150 °C and 480 °C
- Precise temperature calibration possible, calibration range ± 50 °C
- Temperature stability: ± 2 °C (without load / MCU-controlled temperature calibration)
- Temperature setting possible in 5-degree or 1-degree increments
- Automatic, adjustable temperature reduction during soldering breaks to 150 °C (1-120 min)
- Protection against temperature adjustment
- ESD-safe design, low-voltage heating completely separated from the power supply
- Freely positionable holder
- Intelligent detection of working or non-working status.
Technical Data
| Model | GT-5200P |
|---|---|
| Power output | 200 watts |
| Temperature range | 150°C - 500°C |
| Temperature offset range | ±50°C |
| Temperature setting | 5 digits (standard) / 1 digit (fine-tuning) |
| Temperature stability | 2°C |
| Heating element | with silver alloy |
| ESD protection | ✓ |
| Earthing resistance | < 2 Ohm |
| Earth potential | < 2 mV |
| Weight | 5.68 kg |
| Channel | 1 |
| Power supply | 230 V / 50 Hz |
| RoHS | Compliant |
Documentation
Accessories
T50-1.2C soldering tip with integrated heating element
Product Nr.: T50-1.2C
The Atten T50 series are 50W soldering tips for the GT-Y050 soldering iron compatible with the GT series machines.
€20.00*
T130-2.4D Chisel Tip
Product Nr.: T130-2.4D
The Atten T130 series are 130 W soldering tips for the GT-Y130 soldering iron compatible with the GT series devices.
€20.00*
T150-3.2D soldering tip with integrated heating element
Product Nr.: T150-3.2D
The Atten T150 series are 150W soldering tips for the GT-Y150 soldering iron compatible with the GT series machines.
€20.00*
GT-N100 Electronic Tweezers
Product Nr.: GT-N100
The Atten GT-N100 is an electronic tweezer that can reach temperatures of 480 degrees up to 100 watts.
€59.00*
GT-Y050 soldering iron
Product Nr.: GT-Y050
The Atten GT-Y050 is a 50 watt soldering iron that is compatible with the T50 series soldering tips.
€39.00*
ST-701 PCB holder for ST-7500 preheating plate
Product Nr.: ST-701
The ST-701 is the matching PCB holder plate for the ST-7500 station.
€199.00*
GT-Y130 soldering iron
Product Nr.: GT-Y130
The Atten GT-Y130 is a 130 watt soldering iron that is compatible with the T130 series soldering tips.
€45.00*
TR-045 Soldering rosin flux
Product Nr.: TR-045
The TR-045 flux causes a better wetting of the workpiece by the solder.
€10.00*
GT-Y150 soldering iron
Product Nr.: GT-Y150
The Atten GT-Y150 is a 150 watt soldering iron that is compatible with the T150 series soldering tips.
€50.00*
AT-F10 Soldering tip refresher
Product Nr.: AT-F10
The AT-F10 soldering tip refresher refreshes soldering tips and counteracts their wear.
€10.00*
FT-90A magnifying glass & mounting stand for circuit boards
Product Nr.: FT-90A
The stand FT-90A facilitates precise soldering work by being able to enlarge the soldering point and fixing the board.
€15.00*
ST-1016 solder fume extraction
Product Nr.: ST-1016
The soldering fume extractor is used to extract soldering fumes at the soldering work station, easily replaceable activated carbon filters are used.
€39.00*