DSC Freescale Mikrocontroller Debugger
Digital Signal Controllers (DSC) combine the best of microcontrollers (MCU) and powerful digital signal processing (DSP) functions in a single chip. The tools provided by eVision Systems help you to reduce the complexity of application and product tests and to implement your application on your MCU without errors.
1. Compatible Debug Interfaces
The Multilink models greatly simplify programming and debugging of embedded target systems. They allow a PC to communicate with a target processor via a high-speed USB interface on the PC and a debug port on the microcontroller. The PC can then control the microprocessor through the target chip's debug port. Debug mode allows full control over processor operation, regardless of whether the processor has already been programmed. For example, a controlling application can access the memory from the CPU's point of view.
If you are new to on-chip debugging, you can access a short tutorial here.
The Multilink Series
Compatible multilink models for DSC
- The USB Multilink Universal, which is compatible with the ARM Cortex as well as the NXP Freescale and other devices. (see supported device list)
Common features of both models
Fast, trouble-free USB 2.0 communication interface
Draw your power directly from the USB port - no external power supply required
Multi-voltage support for targets from 1.6 to 5.25 volts
Contains all ribbon cables for all supported architectures
The Multilink FX Universal model, which, in addition to enhanced security and automation functions, enables debugging and programming at 4 to 10 times the speed. The FX Universal model supports the same wide range of MCU families as the Universal version plus devices from the MPC5xx/8xx and HC16/683xx series. (see supported device series)
DSC Flash Programming Software
The addition of the UNITDSC flash programming software enables direct access to chip resources. This software package consists of interface routines with which a PC application can control and debug DSC devices via the DSC-compatible hardware interfaces of PEmicro via the debug port. The package contains both C / C ++ and Delphi sample source code, an API file for connecting to the PEmicro software library (DLL), and the library (DLL) itself. The C and Delphi modules in the software package are supplied as sample source code that is connected to the DLL to drive the cable and control the DSC target.
Supported Development Tools
NXP/Freescale CodeWarrior 10.6, IAR Embedded Workbench, Keil -Vision
- Integrated support for Multilink Universal & FX as well as Cyclone Universal for debugging and programming
Atollic True STUDIO, KDS Kinetis Design Studio, Kosmische IDE & ZAP
- Use the free PEmicro GDB Server to support the Multilink Universal & FX and the Cyclone Universal for debugging and programming
In addition, interface routines are available, consisting of a set of C libraries that allow calling the APIs for the BDM interface.
2. Compatible In System programmers
PEmicro's CYCLONE Flash Programmers are powerful tools for in-circuit programming, debugging and testing of microcontrollers (MCU), either in standalone mode or controlled from a PC. The PE Micro programmers are reliable, easy to configure and extremely easy to use.
Key Features
- Stand alone programming
- Delimitation and encryption of the programming image
- Cyclone powers the target system
- Manual and automated programming
- Support for serial number setting
- Use as a debug probe during development
Operating Modes
- Interactive programming packages are provided for all supported CPU families.
- Link to a PC: Multiple target programs downloadable. The Cyclone can then be used as a manually controlled, standalone flash programmer for on-chip or off-chip memory.
- Control via a PC (Ethernet, USB, serial interface): Automated commands, batch commands or a C program from the DLL included in the package allow the Cyclones to be controlled.