€176.00*
- 1 year warranty
- 2.5% advance payment discount
- If you use the payment method in advance by bank transfer, 2.5% of the purchase amount will be automatically deducted at the checkout.
In Stock, Delivery time: 1 - 3 days
.jpg){kind=icon}
.jpg){kind=icon}
.jpg)
.jpg)
.jpg)
.jpg)
Description
The Micsig RCP500 current probe offers a measurable range in AC current from 200mA to 500A and a bandwidth from 15 Hz to 300 KHz. Thanks to the Rogowski coil design, the flexible loop can be easily wrapped around a cable, allowing measurements in hard-to-reach places. The RCP500 has an accuracy of 1% and noise of less than 2mV. The compact design makes the RCP500 current probe ideal for mobile use and can be used on Micsig oscilloscopes without an external power supply via the UPI multifunction interface.
When used with any other manufacturer's oscilloscope, a universal adapter (PA05) is included to provide power to the probe via an ordinary 5V USB output. The AC current clamps can measure current signals with complex waveforms, such as transient inrush currents of power devices, sinusoidal currents of three-phase power systems, harmonic components of measured currents, current measurement of IGBTs and MOSFETs, etc.
Technical Data
| Modellspezifikation |  DP10007 |
|---|---|
| Bandbreite | 100 MHz |
| Kanäle | 1 |
| Anstiegszeit | 3,5 ns |
| Dämpfung | x10, x100 |
| Gesamtbereich (DC+ACpp) | 70 V (10x) 700 V (100x) |
| Max. Eingangsspannung (im Vergleich zu Masse) | 1000 V, CAT I |
| CMRR | ≤ -80 dB (50 Hz) ≤ -60 dB (20 KHz) ≤ -50 dB (1 MHz) ≤ -40 dB (10 MHz) |
| Ausgangsspannung | ≤ 7 V |
| Energieversorgung | USB (5V), 1,25 W |
| Kabellängen | Eingang: 45 cm Ausgang: 90 cm |
| Maße | 145 x 60 x 27 mm |
| Modellspezifikation |  RCP500 |
|---|---|
| Bandwidth | 15 Hz - 300 KHz |
| Measuring range | 200 mA - 500 A |
| Output port | Powered BNC / External BNC |
| Output sensitivity | 10 mV/A |
| Accuracy | 1% |
| Phase accuracy | ≤0,8° (45Hz-66Hz) |
| Temperature coefficient | Operating temperature. Range + 0.05 × accuracy specification /℃ (23℃±5℃） |
| Position accuracy of the conductor | Within ±1% (deviation from the center) |
| Influence of external magnetic fields | 1.5% fs or less (400 A/m, 50 Hz/60 Hz) |
| Offset voltage | ±1mV or below |
| Maximum voltage | AC 10 kV RMS (1 minute), (50 Hz/60 Hz) (Rogowski coil part only) |
| Output impedance | High resistance |
| Output noise | ＜2mv rms |
| Diameter of the conductor to be tested | ≤Φ50mm |
| Power supply | DC Current 5V |
| Cable length from coil to intergrator | 2m (customizable) |
| Integrator dimensions | 37*22*82mm |
| Inner diameter of Rogowski coil | 50 mm (anpassbar) |
| Rogowski coil thickness | Ca. Ø6mm |
| Operating temperature | -20℃ - 70℃ |
| Storage temperature | -30℃ - 70℃ |