Explore TH2832 Compact LCR Meter with 0.05% accuracy & 200kHz test frequency. Ideal for capacitor, inductor, resistor and DCR testing in R&D and production.
Description
The Techmize TH2832 is a compact bench-top LCR meter for testing passive components in the lab, in incoming inspection and on the production line. It measures from 20 Hz to 200 kHz with 0.05% basic accuracy and 6-digit resolution.
Beyond standard LCR measurement, the TH2832 adds a built-in ±5 V / ±50 mA DC bias source, a programmable DCR test level, constant-level (ALC) operation and simultaneous Ls-Rd / Lp-Rd display. That makes it well suited to inductor and transformer work, where inductance and winding resistance are needed in a single test.
Key specifications
- Test frequency: 20 Hz – 200 kHz, continuous
- Basic accuracy: 0.05% (LCRZ), 0.1% (DCR)
- Display: 4.3" TFT LCD, 6-digit readings
- Test signal level: 10 mV – 2 Vrms / 100 µA – 20 mArms
- DC bias source: 0 to ±5 V, 0 to ±50 mA
- DCR test level: 50 mV – 2 V DC, 10 µΩ resolution
- Speed: up to 75 meas/s (13 ms, ≥10 kHz)
- Interfaces: USB Host, USB Device, RS232C, Handler (standard); RS485, GPIB, Scanner (optional)
Features
- Wide frequency range: 20 Hz – 200 kHz covers mains-frequency components through to switching-converter magnetics.
- Fast testing: three speed settings – Fast 13 ms, Medium 90 ms, Slow 370 ms (at ≥10 kHz).
- Ls-Rd / Lp-Rd function: inductance and DC resistance shown at the same time.
- Built-in DC bias: 0 to ±5 V / 0 to ±50 mA, 0.5 mV and 0.5 µA resolution.
- Constant level (ALC): 20 mV – 1 Vrms or 200 µA – 10 mArms held at the component, with V/I monitoring.
- Selectable source impedance: 30 Ω or 100 Ω, to match test conditions to other instruments or specifications.
- Component sorting: comparator with 10 bins (BIN1–BIN9, NG, AUX), bin counting and PASS/FAIL LEDs on the front panel.
- List sweep: 10 points; frequency, AC voltage/current and internal/external bias can be swept, with separate sorting per point.
- Correction: Open, Short and Load correction.
- Storage: 100 internal setup files and 201 test results; save setups, CSV results and screenshots to a USB stick, and update firmware the same way.
- Automation-ready: Handler interface for production lines, plus RS232C and USB for PC control.
Applications
- Capacitors, inductors, resistors and magnetic cores
- Transformers – inductance and winding resistance
- Piezoelectric devices
- Chip components and network components
- Impedance evaluation of PCBs, relays, switches, cables and batteries
- Incoming inspection and automated sorting in production
Technical Data
| Feature | ![]() TH2830 | ![]() TH2832 |
|---|---|---|
| Display | 4.3 TFT LCD Display 480×272 | 4.3 TFT LCD Display 480×272 |
| Basic accuracy | 0.05% (LCR), 0.10% (DCR) | 0.05% |
| Test frequency | 50Hz-100kHz, Continuous | 20Hz-200kHz, Continuous |
| AC Singal | 10mVrms - 2Vrms; 100μArms - 20mArms | 10mVrms - 2Vrms; 100μArms - 20mArms |
| Output impedance | 30Ω, 100Ω | 30Ω, 100Ω |
| RDC Signal level | 1V | 5mV - 2V |
| DC Bias | - | 0V - ± 5V/0mA - ± 50mA |
| Constant Level (ALC) | No | Yes |
| Test parameters | L, C, R, |Z|, D, Q, |Y|, G, X, θd, θr, RDC, Vm, Im,△% | L, C, R, |Z|, D, Q, |Y|, G, X, θd, θr, RDC, Vm, Im,△% |
| Test Speed (ms) | Fast: 12.5ms; Middle: 83 ms; Slow: 167 ms | Fast: 12.5ms; Middle: 83 ms; Slow: 167 ms |
| Internal Storage | 100 LCRZ instrument setting files, 201 times test results | 100 LCRZ instrument setting files, 201 times test results |
| USB External Storage | Instrument setting files , measurement result CSV files, printed screen (GIF format) | Instrument setting files , measurement result CSV files, printed screen (GIF format) |
Documentation
eVision Praxis











.jpg)
.jpg)
.jpg)
.jpg)
