USB Type-C to USB 3.1 Standard-A connector module for testing cables with USB 3.1 Standard-A ends and Type-C ends with the Advanced Cable Tester v2
€500.00*
Content: 1
Delivery time: 1-2 weeks
More Information
Product number: TP820210
Manufacturer: Total Phase
Description
The Advanced Cable Tester v2 Connection Module: USB Type-C to USB 3.1 Standard-A enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Type-C on one end and USB Standard-A on the other end of the cable. This module has a USB Type-C female connector and a USB Standard A female connector and can only be used with the Advanced Cable Testerv2.
Main properties
- Short-circuit test
- Test for broken lines
- Continuity test
- DC resistance measurement for most wires, with milli-ohm accuracy on ground and power wires, ohm resolution on most other wires, continuity check on high-speed data lines only
- Signal integrity testing of data lines at 12.8 Gbps per channel
Compatibility Test
- USB 2.0 Hi-Speed cable pair
- USB 3.1 Gen1 / Gen2 and USB 3.2 SuperSpeed wire pairs (Tx + Rx)
- VBUS DC Resistance Test
- GND DC resistance test
- VBUS DC resistance test for USB Type-C port
- Single pin DC resistance test for USB Type-C connector
- Measurement of Rp
Inserts
- Insertion / test counter tracking ensures reliable operation.
- Total Phase uses the highest quality connectors available in our Advanced Cable Tester devices. The expected service life of the Advanced Cable Tester v2 is 10,000 tests per module without test acceptance.
- All termination modules require the use of Total Phase Advanced Cable Tester v2
Additional connection modules
- USB Type-C to USB Type-C (USB 3.2 and earlier specifications). Fully featured and USB 2.0 Type-C cables are supported
- USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Type-C to USB Standard-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Standard-B (USB 3.2 and earlier version specifications)
- Lightning (USB 2.0) to USB Standard-A
- Lightning (USB 2.0) to USB Type-C
- HDMI to HDMI (HDMI 2.1 and earlier version specifications)
- DisplayPort to DisplayPort (DisplayPort 1.4 and earlier version specifications)
Documentation
Other Connector Modules
ACT v2 Connector Modul: HDMI-A auf HDMI-A
TP821010
The HDMI to HDMI Modul has 2 HDMI-A sockets for DUTs and allows testing of HDMI cables up to specification 2.1.
€500.00*
ACT v2 Connector Modul: USB Type-C to USB 3.1 Micro-B
TP820310
The ACT v2 module: USB Type-C to USB 3.1 Micro-B is used to connect to the Advanced Cable Tester v2
€500.00*
ACT v2 Connector Module: USB Type-C to USB Type-C
TP820110
The USB Type-C to USB Type-C module enables testing of cables with USB 2.0 / USB 3.1 / USB 3.2 Type-C cables.
€500.00*
ACT v2 connector module: USB 3.1 Standard-A to USB 3.1 Micro-B
TP820410
Advanced Cable Tester v2 Connection Module - USB 3.1 Standard-A to USB 3.1 Micro-B
€500.00*