The USB Type-C to USB Type-C module enables testing of cables with USB 2.0 / USB 3.1 / USB 3.2 Type-C cables.
€500.00*
Content: 1
Delivery time: 1-2 weeks
More Information
Product number: TP820110
Manufacturer: Total Phase
Description
The Advanced Cable Tester v2 Connection Module: USB Type-C to USB Type-C enables testing of cables with USB 2.0 / USB 3.1 / USB 3.2 Type-C on both cable ends. This module has 2 USB Type-C female ports and can only be used with the Advance Cable Tester v2.
Key Features
- Measure the DC resistance of VBUS and GND cables individually
- Individually measure the DC resistance of the VBUS and GND pins in the USB Type-C connector
- Ensure that the wiring is correct and that no wires are shorted or broken
- USB 2.0 pair testing is supported at around 518Mbps, and all existing SuperSpeed pairs are tested at 5Gbps or 10Gbps
- Check the accuracy of the E-markers
- This is all you need to test USB Type-C cables, whether they are full-featured (USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2) or USB 2.0 are
Test Compatibility / Coverage
- USB 3.2 / 3.1 / 3.0 / 2.0
- PD 2.0, PD 3.0
- Short circuit test
- Test for broken lines
- Continuity testing - dynamic visualization of test results
- DC resistance measurement for most wires, with milli-ohm accuracy on ground and power wires, ohm resolution on most other wires, continuity check on high-speed data lines only
- Signal integrity testing of data lines at 12.8 Gbps per channel
- E-Marker Check
Mating cycles
- Plugging / test counter tracking ensures reliable test operation.
- Total Phase uses the highest quality connectors available in our Advanced Cable Tester devices. The expected lifetime of the USB-C to USB Type-C Advanced Cable Tester v2 is 10,000 tests per module without test acceptance.
- All termination modules require the use of Total Phase Advanced Cable Tester v2.
Additional connection modules
- USB Type-C to USB Standard-A (USB 3.2 and earlier version specifications)
- USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Type-C to USB Standard-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Standard-B (USB 3.2 and earlier version specifications)
- Lightning (USB 2.0) to USB Standard-A
- Lightning (USB 2.0) to USB Type-C
- HDMI to HDMI (HDMI 2.1 and earlier version specifications)
- DisplayPort to DisplayPort (DisplayPort 1.4 and earlier version specifications)
Documentation
Other Connector Modules
ACT v2 Connector Modul: USB Type-C to USB 3.1 Standard-A
TP820210
USB Type-C to USB 3.1 Standard-A connector module for testing cables with USB 3.1 Standard-A ends and Type-C ends with the Advanced Cable Tester v2
€500.00*
ACT v2 Connector Modul: USB Type-C to MFi Lightning USB2
TP823110
USB 3.1 Standard-A to MFI Lightning connector module for testing cables with USB 2.0 Standard-A ends and Apple Lightning USB2 ends with the Advanced Cable Tester v2
€500.00*
ACT v2 Connector Modul: USB Type-C zu USB 3.1 Standard-B
TP820610
USB Type-C to USB 3.1 Standard-B enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Type-C on one end and USB 3.1 Standard-B on the other end of the cable.
€500.00*
ACT v2 Connector Modul: HDMI-A auf HDMI-A
TP821010
The HDMI to HDMI Modul has 2 HDMI-A sockets for DUTs and allows testing of HDMI cables up to specification 2.1.
€500.00*
ACT v2 Connector Modul: USB 3.1 Standard-A to MFi Lightning USB2
TP823010
USB 3.1 Standard-A to MFi Lightning USB2 allows testing of cables with USB 2.0 Standard-A on one cable end and Apple Lightning USB2 on the other cable end.
€500.00*
ACT v2 Connector Modul Bundle: Apple MFi
TP825110
The ACTv2 Connecter Modul Bundle consists of one USB Type-C to USB Type-C, one USB-Type-C to Apple MFi Lightning (USB2) module and two USB Standard-A to Apple MFi Lightning (USB2) modules.
€1,800.00*
ACT v2 Connector Modul: DisplayPort to DisplayPort
TP821110
The Advanced Cable Tester v2 Connector Module: DisplayPort to DisplayPort enables testing of cables with DisplayPort on both cable ends using the Total Phase Advanced Cable Tester v2.
€500.00*
ACT v2 Connector Module Bundle: Video
TP825210
The ACT v2 Module Bundle - Video allows testing of HDMI cables and DisplayPort cables.
€1,800.00*
ACT v2 Connector Module: USB 3.1 Standard-A zu USB 3.1 Standard-B
TP820510
The module enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Standard-A on one end and USB Standard-B on the other end of the cable.
€500.00*
ACT v2 Connector Modul Bundle: USB Type-C
TP825010
The module bundle allows testing of cables with USB 2.0 / USB 3.1 / USB 3.2 cables with the Total Phase Advanced Cable Tester V2.
€1,800.00*
ACT v2 Connector Modul: USB Type-C to USB 3.1 Micro-B
TP820310
The ACT v2 module: USB Type-C to USB 3.1 Micro-B is used to connect to the Advanced Cable Tester v2
€500.00*
ACT v2 connector module: USB 3.1 Standard-A to USB 3.1 Micro-B
TP820410
Advanced Cable Tester v2 Connection Module - USB 3.1 Standard-A to USB 3.1 Micro-B
€500.00*