Total Phase ACT v2 Connector Modul: USB 3.1 Standard-A to MFi Lightning USB2

USB 3.1 Standard-A to MFi Lightning USB2 allows testing of cables with USB 2.0 Standard-A on one cable end and Apple Lightning USB2 on the other cable end.

€500.00*

Content: 1

Delivery time: 1-2 weeks

Further information
Request a quote
Product number: TP823010
Manufacturer: Total Phase

Description

The Advanced Cable Tester v2 Connection Module: USB 3.1 Standard-A to MFi Lightning USB2 enables testing of cables with USB 2.0 Standard-A on one cable end and Apple Lightning USB2 on the other cable end using the Total Phase Advanced Cable Tester v2. This module has an Apple Lightning connector and a USB standard connector and can only be used with the Advanced Cable Tester v2.

Key Features

  • Make sure the Lightning connector is turned on
  • Measure the DC resistance of VBUS and GND individually
  • Make sure the wiring is correct and that no wires are shorted or broken
  • Signal integrity testing of USB 2.0 pairs is supported at around 518 Mbps
  • Quiescent current test passed / reported failed
  • Surge test passed / reported failed
  • Power recovery test passed / reported failed
  • This is all you need to test USB Standard A to Lightning USB2 cables



Compatibility Test

  • Turn on the Lightning Plug
  • Testing the signal integrity of the USB 2.0 (DP / DM)
  • VBUS DC Resistance Test
  • GND DC resistance test
  • Combined value of VBUS and GND DC resistance given per specification
  • quiescent current test
  • Surge Protection Test
  • Voltage Recovery Test

Apple MFi membership required to run these tests

Inserts

  • Insertion / test counter tracking ensures reliable operation.
  • Total Phase uses the highest quality connectors available in our Advanced Cable Testers. The expected service life of the Advanced Cable Tester v2 is 10,000 tests per module without testing.
  • All connection modules require the use of the Total Phase Advanced Cable Tester v2.



 Passing Eye
Pass USB Type-C to Lightning USB2 eye diagram
Failing Eye
Incorrect eye diagram from USB Type-C to Lightning USB2

Other connection modules

    • USB Type-C to USB Type-C (USB 3.2 and earlier specifications). Fully featured and USB 2.0 Type-C cables are supported
    • USB Type-C to USB Standard-A (USB 3.2 and earlier version specifications)
    • USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
    • USB Type-C to USB Standard-B (USB 3.2 and earlier version specifications)
    • USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
    • USB Standard-A to USB Standard-B (USB 3.2 and earlier version specifications)
    • Lightning (USB 2.0) to USB Type-C
    • HDMI to HDMI (HDMI 2.1 and earlier version specifications)
    • DisplayPort to DisplayPort (DisplayPort 1.4 and earlier version specifications)

Documentation

ACT2 HDMI-HDMI
ACT v2 Connector Modul: HDMI-A auf HDMI-A
TP821010
The HDMI to HDMI Modul has 2 HDMI-A sockets for DUTs and allows testing of HDMI cables up to specification 2.1.

€500.00*
ACT v2 - USB Type C - USB Micro B
ACT v2 Connector Modul: USB Type-C to USB 3.1 Micro-B
TP820310
The ACT v2 module: USB Type-C to USB 3.1 Micro-B is used to connect to the Advanced Cable Tester v2

€500.00*
ACT2 - USB Type-C zu USB Type-C
ACT v2 Connector Module: USB Type-C to USB Type-C
TP820110
The USB Type-C to USB Type-C module enables testing of cables with USB 2.0 / USB 3.1 / USB 3.2 Type-C cables.

€500.00*
ACT2-A-MicroB
ACT v2 connector module: USB 3.1 Standard-A to USB 3.1 Micro-B
TP820410
Advanced Cable Tester v2 Connection Module - USB 3.1 Standard-A to USB 3.1 Micro-B

€500.00*
ACT2 Type C auf Standard A
ACT v2 Connector Modul: USB Type-C to USB 3.1 Standard-A
TP820210
USB Type-C to USB 3.1 Standard-A connector module for testing cables with USB 3.1 Standard-A ends and Type-C ends with the Advanced Cable Tester v2

€500.00*
ACT2 - Displayport-Displayport
ACT v2 Connector Modul: DisplayPort to DisplayPort
TP821110
The Advanced Cable Tester v2 Connector Module: DisplayPort to DisplayPort enables testing of cables with DisplayPort on both cable ends using the Total Phase Advanced Cable Tester v2.

€500.00*
ACT2 - Standard-A zu Standard-B
ACT v2 Connector Module: USB 3.1 Standard-A zu USB 3.1 Standard-B
TP820510
The module enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Standard-A on one end and USB Standard-B on the other end of the cable.

€500.00*
ACT2 - Video - Bundle
ACT v2 Connector Module Bundle: Video
TP825210
The ACT v2 Module Bundle - Video allows testing of HDMI cables and DisplayPort cables.

€1,800.00*
ACT2 -USB Type-c zu MFi Lightning
ACT v2 Connector Modul: USB Type-C to MFi Lightning USB2
TP823110
USB 3.1 Standard-A to MFI Lightning connector module for testing cables with USB 2.0 Standard-A ends and Apple Lightning USB2 ends with the Advanced Cable Tester v2

€500.00*
ACT2 - USB Type-C Bundle
ACT v2 Connector Modul Bundle: USB Type-C
TP825010
The module bundle allows testing of cables with USB 2.0 / USB 3.1 / USB 3.2 cables with the Total Phase Advanced Cable Tester V2.

€1,800.00*
ACT2 - Apple MFi - Bundle
ACT v2 Connector Modul Bundle: Apple MFi
TP825110
The ACTv2 Connecter Modul Bundle consists of one USB Type-C to USB Type-C, one USB-Type-C to Apple MFi Lightning (USB2) module and two USB Standard-A to Apple MFi Lightning (USB2) modules.

€1,800.00*
ACT2 - Type-C zu Standard-B
ACT v2 Connector Modul: USB Type-C zu USB 3.1 Standard-B
TP820610
USB Type-C to USB 3.1 Standard-B enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Type-C on one end and USB 3.1 Standard-B on the other end of the cable.

€500.00*