The module bundle allows testing of cables with USB 2.0 / USB 3.1 / USB 3.2 cables with the Total Phase Advanced Cable Tester V2.
€1,800.00*
Content: 1
Delivery time: 1-2 weeks
Further information
Product number: TP825010
Manufacturer: Total Phase
Description
All Advanced Cable Tester v2 connector modules allow testing of cables with USB 2.0 / USB 3.1 / USB 3.2 cables with the Total Phase Advanced Cable Tester V2.
Key Features
- Measure DC resistance of VBUS and GND cables individually
- Individually measure the DC resistance of the VBUS and GND pins in the USB Type-C connector
- Ensuring correct wiring and checking for shorted or open wires
- USB 2.0 pair testing is supported at around 518Mbps, all existing SuperSpeed pairs are tested at 5Gbps or 10Gbps.
- This is all you need to test USB-C cables, whether they are USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2 or USB 3.2
Please note that these modules are only compatible with the Advanced Cable Tester v2.
Compatibility Test
- USB 3.2/3.1/3.0/2.0
- PD 2.0, PD 3.0
- Short test - dynamic visualization of test results
- Open Testing - Dynamic Visualization of Test Results
- Continuity Testing - Dynamic Visualization of Test Results
- DC resistance measurement on most cables, with milliohm precision on ground and power cables, ohm resolution on most other cables, continuity check on high-speed data lines only
- Signal integrity testing of data lines up to 12.8 Gbit/s per channel
- E-Marker Verification
Inserts
- Tracking the number of inserts/tests ensures reliable operation.
- Total Phase uses the highest quality connectors available in the Advanced Cable Tester. Expected lifetime without test degradation for Advanced Cable Tester v2 USB Type-C to USB Type-C Module, Advanced Cable Tester v2 USB Type-C to USB Standard-A Module, Advanced Cable Tester v2 USB Type-C to USB -Micro B Module and the Advanced Cable Tester v2 USB Type-C to USB Standard B Module is 5,000 tests per module.
- All connection modules require the use of the Total Phase Advanced Cable Tester v2.
This bundle consists of
- ACT v2 Connector Module: USB Type-C to USB Type-C
- ACT v2 Connector Module: USB Type-C to USB Standard-A
- ACT v2 Connector Module: USB Type-C to USB Micro-B
- ACT v2 Connector Module: USB Type-C to USB Standard-B
Documentation
ACT v2 Connector Modul: HDMI-A auf HDMI-A
TP821010
The HDMI to HDMI Modul has 2 HDMI-A sockets for DUTs and allows testing of HDMI cables up to specification 2.1.
€500.00*
ACT v2 Connector Modul: USB Type-C to USB 3.1 Micro-B
TP820310
The ACT v2 module: USB Type-C to USB 3.1 Micro-B is used to connect to the Advanced Cable Tester v2
€500.00*
ACT v2 Connector Module: USB Type-C to USB Type-C
TP820110
The USB Type-C to USB Type-C module enables testing of cables with USB 2.0 / USB 3.1 / USB 3.2 Type-C cables.
€500.00*
ACT v2 Connector Modul: USB 3.1 Standard-A to MFi Lightning USB2
TP823010
USB 3.1 Standard-A to MFi Lightning USB2 allows testing of cables with USB 2.0 Standard-A on one cable end and Apple Lightning USB2 on the other cable end.
€500.00*
ACT v2 Connector Modul: USB Type-C zu USB 3.1 Standard-B
TP820610
USB Type-C to USB 3.1 Standard-B enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Type-C on one end and USB 3.1 Standard-B on the other end of the cable.
€500.00*
ACT v2 connector module: USB 3.1 Standard-A to USB 3.1 Micro-B
TP820410
Advanced Cable Tester v2 Connection Module - USB 3.1 Standard-A to USB 3.1 Micro-B
€500.00*
ACT v2 Connector Module: USB 3.1 Standard-A zu USB 3.1 Standard-B
TP820510
The module enables testing of cables with USB 3.2 / USB 3.1 / USB 2.0 Standard-A on one end and USB Standard-B on the other end of the cable.
€500.00*
ACT v2 Connector Modul: USB Type-C to USB 3.1 Standard-A
TP820210
USB Type-C to USB 3.1 Standard-A connector module for testing cables with USB 3.1 Standard-A ends and Type-C ends with the Advanced Cable Tester v2
€500.00*
ACT v2 Connector Modul: USB Type-C to MFi Lightning USB2
TP823110
USB 3.1 Standard-A to MFI Lightning connector module for testing cables with USB 2.0 Standard-A ends and Apple Lightning USB2 ends with the Advanced Cable Tester v2
€500.00*
ACT v2 Connector Modul: DisplayPort to DisplayPort
TP821110
The Advanced Cable Tester v2 Connector Module: DisplayPort to DisplayPort enables testing of cables with DisplayPort on both cable ends using the Total Phase Advanced Cable Tester v2.
€500.00*