Offer

Description

The MSO3000 series from ACUTE are mixed-signal oscilloscopes and so-called 6-in-1 analysers. A data acquisition system (DAQ), a DVM, a DSO, a frequency counter, a logic analyser and a protocol analyser are integrated in one system. The MSO3000 series also has a very compact design and does not require an external power supply unit, as it receives the necessary power directly via the USB3.0 port, i.e. it is absolutely mobile and a smart solution for service and home offices. There are 4 analogue and 16 digital channels available per module, which can be cascaded to 16 analogue and 64 digital for both models. The digital inputs are designed for 2 GHz timing, 250 MHz state analysis (max.) and the analogue inputs for 1 GHz conversion rate and 200 MHz bandwidth (max.). The analogue resolution is max. 16 bit. Depending on the resolution, 512MS/ch analogue and 4Gb digital are available per module. In addition, it is possible to activate a streaming mode via the PC working memory. More than 100 bus decodings, over 30 bus triggers and over 20 analysis protocols represent an exceptional scope of delivery, see data sheet.

Features

6-in-1 device: DAQ, DSO, DVM, frequency counter, logic analyser, protocol analyser
PC-based, USB3.0 interface / powered (Type-A / Type-C)
Total memory: 4 GB
Data logger (HDD/SSD memory)
DSO: 4 channels (cascading of 4 units up to 16 channels), 1 GS/s S/R, 200 MHz bandwidth
Digital voltmeter: 3 digits
Frequency counter: 5 digits
Logic/protocol analyser: 16 channels, 2 GS/s timing analysis, 250 MHz state analysis

Open protocol interface

If the desired protocol is not included in the more than 100 protocol interpreters, or if there is a need to integrate a custom protocol, the open protocol interface of the MSO3000 series is a helpful feature. To implement a custom decoding function, simply write a Dynamic Link Library (DLL) and add it to the plugin folder of the installation directory. The structural design of the DLL describes the LA Open Decode Interface.

Multiple Trigger Functions

Edge Trigger: Trigger on a rising/falling/both/alternate edge.
Pattern Trigger: Trigger when the logic inputs make the selected function true.
Trigger Hold Off : Holdoff time adjustable up to 10s.
Runt Trigger: Use 2 voltage thresholds and pulse width to trigger on either alternating/positive/negative running signals.

Other functions

Log analyser

Display log data in real time. Application time: Huge log data with some idle time in between.

Protocol logger

Store large amounts of data on the SSD hard disk like a data logger
Time of use: Huge log data

Log monitor

Record log data like dash cameras using only the unit's memory.
Time of application: Trigger event occurs only after a very long time.

PC GUI software

Powerful PC oscilloscope, log and logic analysis software.

Programming languages & downloads

A VB and a VC driver are available for developing your own applications. Below you will find the download section of Acute, where you can download drivers, SDKs and PC software.

To the download section

Productvideo

Oscilloscope: I2C Debugging

Protocol Analyzer: I3C Decoding

Logic Analyzer: eSPI Debugging

Technical Data

Model	MSO3124E	MSO3124B	MSO3124H	MSO3124V
Channels	4	4	4	4
Recording length per channel	128 / 256 Mpts	128 / 256 Mpts	128 / 256 Mpts	128 / 256 Mpts
Vertical resolution	8 bit	8 bit	16 bit	16 bit
Analogue & digital triggers	Group I / I	Group I, II, Bus I / I, II	Group I, II, Bus I / I, II, III	Group I, II, Bus I, II / I, II, III
Electrical validation (protocol)	-	-	-	I2C, I3C, SPI, UART,...

Analogue: 4CH, 1 GS/s S/R, 200 MHz bandwidth
Group I: Edge, either, external, falling, rising, video, width
Group II: Runt, pattern/status, timeout, transition, setup/hold, B-trigger, B-event, window
Bus I: BiSS-C, CAN 2.0B/CAN FD, DALI, DP_Aux[1], I2C, I2S, LIN2.2, Modbus, Profibus, SENT, SPI, SVI2, UART UART(RS232), USB1.1, . ..
Bus II: SVI3[2], SVID[3]
[1] Optional DP_Aux adapter required.
[2] On request from an AMD approved user. SVI3 bus triggers/decoders are ONLY supported by MSO3124V.
[3] At the request of a user who has signed CNDA with Intel. SVID bus trigger/decoding are supported ONLY by MSO3124V.

Digital: 16 CH, 2 GS/s timing analysis, 250 MHz state analysis
Bus Trigger I: CAN2.0B/CAN FD, HID over I2C, I2C, I2S, LIN2.2, MIPI I3C 1.1, SENT, SPI, UART, USB PD 3.1, ...
Bus Trigger II: DALI, LPC, MDIO, Mini/Micro LED, MIPI RFFE 3, MIPI SPMI 2, PMBus, Profibus, SMBus, SVI2, ...
Bus Trigger III: eMMC 4.5, eSPI, MII, RGMII, RMII, SD 3.0 (SDIO 2.0), serial Flash (SPI NAND), SVI3[2], SVID[3]
Protocol Analyser I: CAN2.0B/CAN FD, HID via I2C, I2C, I2S, LIN2.2, MIPI I3C 1.1, SENT, SPI, UART, USB PD 3.1, ...
Protocol Analyser II: DALI, MDIO, Mini/Micro LED, MIPI RFFE 3, Modbus, PMBus, Profibus, SMBus, USB1.1
Protocol Analyser III: eSPI, MII, RGMII, RMII, SVI3[2], SVID[3]
Bus decoding: CAN 2.0B/CAN FD, DP_Aux[1], eSPI, I²C, I²S, MII, MIPI I3C 1.1, MIPI RFFE 3, MIPI SoundWire, SPI, SPI Flash, SVI3[2], SVID[3], UART , USB PD 3.1, ...(100+)
[1] Optional DP_Aux adapter required.
[2] ONLY on request from users authorised by AMD, SVI3 trigger & PA & bus decoding supported ONLY by MSO3124H/V.
[3] ONLY on request from users signed CNDA with Intel, SVID trigger and PA & bus decoding supported ONLY by MSO3124H/V.